Product Overview
EVOLVE COMPRESSOR ANTI-VIBRATION ISOLATORS (4 PACK)
So if you've already installed a Viair compressor, you know that the ANTI-VIBRATION ISOLATORS that are included are very small and fragile. They will wear out in a year or two, depending how you have them mounted. These will probably last you the life of your compressor!
- Helps reduce the compressor noise by keeping the vibration from traveling into the vehicle from the compressor.
- Much beefier than the little factory rubber isolators that come with the compressors.
- Will outlast the factory isolators by many years (less maintenance).
INSTALLATION:
Simply remove the factory mounting bolts, rubber washers and brass inserts (put away or discard). Install the EVOLVE isolators in the same mounting holes of the brackets. You may need to drill out your holes on the mounting panel of the vehicle to accomodate the 5/16" studs coming off of the bottom of the isolators. Use the locking nuts to secure the isolators to the panels.
PLEASE NOTE: Medium threadlocker such as LocTite Blue is recommend on all threads.
INCLUDES STAINLESS STEEL 5/16" MOUNTING HARDWARE. RUBBER PORTION IS 1" DIA. X 1" TALL
***PURCHASE ONE 4-PACK PER COMPRESSOR***
Compressor not included!
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.