EVOLVE TANK BRACKET SYSTEM WITH SIDE COMPRESSOR MOUNTS - 3 CLAMPS - RAW FINISH

(No reviews yet) Write a Review
$299.99
SKU:
EV-TBS-BIL-3CL-SIDE-RAW FS50
Weight:
7.00 LBS
Shipping:
Free Shipping

Product Overview

***5 GALLON AIR TANK, COMPRESSORS, AND VALVE MANIFOLD NOT INCLUDED- SOLD SEPARATELY***

Looking for a clean looking mounting system to save you hours of measuring, marking and save you from drilling a kazillion holes in your ride?  How about a system that can house a tank, valve, and a compressor or two - that will only require four, yes, "4" holes to mount your entire air management system?  The EVOLVE Tank Bracket System can be used simply as an upgrade to give your tank that extra touch.  You can also add upgrades to bolt-on a set of compressors and even add a bracket to mount your manifold valve.  You also have the option of  positioning the mounting feet on the back of the clamps, or on top, if you want to hang the kit from the rear package tray in a trunk setup.  


FINISHES
We offer these kits in two finishes.  The first is RAW STEEL, so you can paint, powder coat or even electroplate any finish you want.  But if you're looking for a kit that's ready to install right out of the box, then choose our MATTE BLACK POWDER COATED kits for a sleek, durable finish ready to assemble and install. 

HARDWARE
Includes all BILLET ALUMINUM HARDWARE and STAINLESS STEEL bolts, so you don't have to worry about your hardware rusting!  You can also polish or brush the stainless steel bolts for an added touch.  One tube of blue medium strength thread-locker is also included.  Only the best components in our EVOLVE kits by AVS!  

TANK CLAMPS
Our EVOLVE Tank Clamps are compatible with any 6.625" (6-5/8") diameter air tank.  Here's a few:
***AVS 3 & 5 gallon tanks
***Accuair 3 & 5 gallon tanks
***EVOLVE 3 & 5 gallon tanks

***SEAMLESS TANKS (6" series only)
NOTE:  Our clamps are not compatible with Air Lift / FLO Air Ride / or most steel air tanks.

VALVE MOUNTING BRACKET
Our EVOLVE mounting bracket is designed to fit many of the valve manifolds on the market and can be added as an option for our EVOLVE tank bracket systems. The EVOLVE valve bracket is compatible with the following 4-corner valve manifolds:
AVS valve manifold
EVOLVE valve manifold
Accu Air VU4 valve manifold
Slam Specialties SV-8C valve manifolds including (#202046/#202053)
Air Lift 3H/3P valve manifolds

COMPRESSOR BRACKETS
Our EVOLVE Compressor Brackets are compatible with the following Viair compressors:
***Viair 380C compressors

***Viair 400C compressors

***Viair 425C compressors

***Viair 444C compressors

***Viair 450C compressors
***Viair 480C compressors

***Viair 485C compressors

Want one of these systems already fully assembled, plumbed, wired, etc?  All that you will need to do is run the 4 air lines to your bags, hook up power, ground and accessory, and install four bolts.  All components come fully assembled, wired, tested and leak tested before crating and shipping.  SUPER EASY TO INSTALL!!!  >>>CLICK HERE<<<

 

 warning-triangle-ca-final-01.png WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

 

Reviews

(No reviews yet) Write a Review