Product Overview
Finally, a rear disc brake conversion that doesn't break the bank. Installation is simple, requires no welding, and it's not necessary to pull out the axle shafts. All serviceable parts are also available individually. This kit is compatible with GM 1988-1999 pickups and 1992-2000 SUV's with heavy duty 6 lug rear ends (11" drum axles).
Even if it is listed below, if it is not the 11" drum size or does not have the correct flange measurements then the kit will not fit.
Verify your flange dimensions and offset with the images below. This can be done without removing anything simply by measuring the flange at the back side of the drum.
NOTE: CK1500 11" drum axles typically have a 3.6" offset, but in some cases have a 5.5" offset which will require machined spacers. Offset is measured from the axle housing flange to the axle shaft face (without brakes) as shown below
92-00 Chevrolet Blazer, Tahoe, Suburban
92-00 GMC Yukon, Denali, XL 1500
88-98 Chevrolet C2500
88-98 GMC C2500
96-02 Chevrolet Express 2500
96-02 GMC Savana 2500
99-00 Cadillac Escalade
*Kit includes "Smooth" rotors. Drilled/Slotted rotors available for upgrade. Please check drop down menu.
Even if it is listed above, if it is not the 11" drum size or does not have the correct flange measurements then the kit will not fit.
Note: will fit inside many *but not all* 15 inch wheels. Typically if the caliper contacts inside of the wheel, clearance can be gained by light sanding of caliper contact points.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.