Product Overview
VIAIR 1.5 GALLON AIR SOURCE KIT FAST FILL TO 120psi (12v)
Viair P/N 20003
120 PSI Air Source Kits come with a low amp-draw, 25% duty cycle, 275C VIAIR compressor mounted on a 150 PSI-rated 1.5 gallon air tank with 5 ports. All Air Source kits come with a pre-wired pressure switch (P/N 20003 / 90-120 PSI). The 120 PSI Air Source Kit comes complete with a 1/4” NPT brass drain cock, 1/4” NPT ASME coded and certified safety valve, 1/2” NPT port compression fitting for 3/8” air line pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
INCLUDED PARTS:
- 275C Pewter Air Compressor
- 1.5 Gallon Air Tank
- Pressure Switch (90 PSI On / 120 PSI Off)
- Safety Valve (175 PSI)
- Drain Cock
- Leader Hose with Check Valve
SPECIFICATIONS:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 25% @ 100 PSI
- Max. Working Pressure: 120 PSI
- Max. Amp Draw: 20 Amps
- Dimensions: 15.2"L x 5.9"W x 12.8"H
- Net Weight: 15.65 lbs.
| 1.5 Gallon Tank | Fill Rate |
| 0 to 120 PSI | 2 min. 15 sec. |
| 90 to 120 PSI | 35 sec. |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.