Product Overview
VIAIR CONSTANT DUTY ONBOARD AIR SYSTEM (12V, 150 PSI COMPRESSOR, 2.5 GAL. TANK)
Viair P/N 10007
FREE SHIPPING LOWER 48 STATES ONLY!!!
VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
INCLUDED PARTS:
- 2.5 Gallon VIAIR Air Tank
- 450C VIAIR Compressor
- 35ft. Coil Hose
- 1/4” NPT Quick Connect Stud (F)
- 1/4” NPT Quick Connect Coupler (M)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch with Relay (110 PSI on, 150 PSI off)
- Reducer (1/8” NPT F to 1/4” NPT M)
- 1/4” NPT 175 PSI Safety Valve
- 1/4” NPT Drain Cock
- (3) 1/4” NPT Compression Fittings
- 4” Strip of Continuous Grommet Material
- 20ft. 12-Gauge Wire with Inline Fuse Holder
- Electrical Connections
SPECIFICATIONS:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 19 Amps
| 2.5 Gallon Tank | Fill Rate |
| 0 to 145 PSI | 3 min. 02 sec. |
| 110 to 145 PSI | 59 sec. |
| 35" x 12.5" | Fill Rate |
| 0 to 30 PSI | 6 min. 55 sec. |
| 15 to 30 PSI | 3 min. 30 sec. |
| 37" x 12.5" | Fill Rate |
| 0 to 30 PSI | 7 min. 56 sec. |
| 15 to 30 PSI | 4 min. 09 sec. |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.