Product Overview
VIAIR SUPER DUTY ONBOARD AIR SYSTEM (12V, 150 PSI COMPRESSOR, 2.0 GAL. TANK)
Viair P/N 10008
FREE SHIPPING LOWER 48 STATES ONLY!!!
VIAIR’s Super Duty Onboard Air System is a pre-packaged compressed air solution that provides two fast 325C, 33% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
INCLUDED PARTS:
- 2.0 Gallon VIAIR Air Tank
- (2) 325C VIAIR Compressors
- 30ft. Coil Hose w/ Quick Connects
- Tire Inflation Gun with 200 PSI Gauge
- 0-150 PSI Pressure Regulator
- Blow Gun Air Tool
- 1/4” NPT Quick Connect Coupler (F)
- Dash Panel Gauge with ON/OFF Switch
- Pressure Switch (110 PSI on, 150 PSI off)
- (2) 40-amp Relays
- Inline Fuse Holder w/ Fuse
- 1/4” NPT 175 PSI Safety Valve
- 1/4” NPT Drain Cock
- (2) 1/8” BSP to 1/4” NPT (Air Locker Use)
- (5) 1/4” NPT Compression Fittings
- 4” Strip of Continuous Grommet Material
- 20ft. 12-Gauge Wire
- T-Fitting (1/4”(M) x 1/4”(F) x 1/8”(F))
- Electrical Connections
SPECIFICATIONS:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 33% @ 100 PSI
- Max. Working Pressure: 150 PSI
- Max. Amp Draw: 35 Amps
| 2.0 Gallon Tank | Fill Rate |
| 0 to 145 PSI | 1 min. 26 sec. |
| 110 to 145 PSI | 24 sec. |
| 33" x 12.5" | Fill Rate |
| 0 to 30 PSI | 4 min. 10 sec. |
| 15 to 30 PSI | 2 min. 13 sec. |
| 35" x 12.5" | Fill Rate |
| 0 to 30 PSI | 4 min. 36 sec. |
| 15 to 30 PSI | 2 min. 12 sec. |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.